Cork Panels plus

Cork Panels plus

CorkPanels plus super-compressed blond cork panels are ideal for thermo-acoustic insulation that requires reduced thickness and are also suitable for use in the presence of humidity. They are suitable for internal interventions in new buildings and renovations where there is a need to eliminate: annoying noises, condensation, wet areas, molds, cold floors, etc..

Data sheet Cork Panels plusDownload Data sheet
Specification Cork Panels plusDownload Specification
Price list Cork PanelsDownload Price list

Related articles


CorkPanel plus is a blond cork panel characterized by excellent values of thermal insulation and breathability typical of natural cork, which reduce the formation of mold and moisture compared to traditional products; another characteristic of cork is that of guaranteeing an excellent noise reduction, making it an ideal product for the realization of floors against impact on the inter-floor slabs, thanks also to its high resistance to compression. The insulating characteristics of cork are guaranteed with a limited panel thickness, making CorkPanels plus the ideal product for building development.

Cork is non-toxic, biologically pure, unalterable, waterproof, breathable, resistant ... All this is cork, which also has the merit of being "Mediterranean" and of proliferating in large quantities in the forests of some regions of our peninsula.

The new technologies of insulation with blond cork synergistically implement these advantages and put these environments in the forefront in terms of reducing heating and energy saving costs. But the main benefit for all is undoubtedly the decrease in CO2 emissions, or a significant improvement in air quality.

 The processing of cork and its transformation carried out with renewable energy, photovoltaic for the production of electricity and biomass for the production of the necessary thermal energy. Transposing over short distances allows a low environmental impact.


CorkPanels plus are ideal for thermo-acoustic insulation that requires reduced thickness and is also suitable for use in the presence of humidity. Specifically it can be used as:

• interspace of the perimeter walls and partitions;
• acoustic insulation;
• dry screeds;
• insulation for counter-floor slab, even with strong presence of rising damp;
• both external and internal thermal insulating wall system, particularly advantageous when used as an internal coat, since it prevents the formation of mold or condensation and allows obtaining excellent thermal insulation values with reduced thickness, limiting the reduction of the usable floor area to a minimum;
• insulation of curved surfaces as the panels of reduced thickness are flexible;
• correction of thermal bridges on reinforced concrete beams and columns;

The installation is closely linked to the type of use of the panel according to which it will be appropriate to adopt the most suitable application method.

  panels's dimensions 1000 x 500 mm

Thicknesses (mm) Weight/Panel(kg) Panels/Pallet m²/Panel Weight/Pallet(kg)
3 0,34 60 3020,40
6 0,69 30 1511,50
10 1,15 20 108,60
15 1,72 10 511,50

Information regarding storage and transport:
• stack horizontally and dry;
• pay particular attention to the edges of the panels;
• remove the pallet packaging only when it is on a flat, stable and dry surface.


Density (kg/m³) 220
Fire resistance according to Circ.Min.Interno 14/09/1961, n. 91 Class 2
Coefficient of thermal conductivity λD W/(m∗K)0,052
Specific heat [J/(kg∗K)]1.674
Resistance to vapor diffusion μ10÷13
Compression resistance at 1 mm deformation (kPa) 86,3
Compression resistance (kg·cm²)12
Flexural strength (kPa)335,39
Soundproofing power (wall) 3 cm external walls (dB) 58
Soundproofing power (wall) 4 cm partition walls (dB)52
Noise reduction between 100 and 3150 Hz dB 14