BetonRadiant Fiber is a modular panel for radiant heating floor systems and consists in a milled Betonwood cement bonded particle board with high density (1350 Kg/m³), a compression resistance equal to 9000 kPa, and an insulating wood fiber FiberTherm.

BetonRadiant Fiber is an excellent solution to obtain a radiant heating floor system with condensing boilers. The system can also be used on the ceiling and for wall-mounted air conditioning, thus eliminating both radiators and air conditioners.

The radiant panel BetonRadiant Fiber is a modular system suitable for any finish, ensuring excellent ease of installation and flexibility, which makes it ideal for the realization of radiant floor heating systems.

One of the panels is milled for housing pipes for radiant floor heating systems, while the other constitutes the insulating underlying layer of insulating wood fiber FiberTherm. The upper panel after laying the pipes and filling the millings is suitable for any surface coating, chosen by the end user.
The two panels are coupled in the factory with a patented system and the wood used in their processing comes from forests controlled by reforestation cycles and pressed with water and hydraulic binder (Portland cement) with high cold compression ratios.


  Cement bonded particle board thickness (mm)
Wood fiber thickness (mm) 20 + 20 20 + 22 22 + 22

Available thicknesses
Coupled panel with cement bonded particle board and wood fiber panel 1200 x 500

On request it is possible to produce different sizes for minimum quantities of 300 square meters.

On request it is possible to make housing millings for pipes larger than 14 mm (standard size), up to a maximum of 17 mm. With a 5% cost increase.

  cement bonded particle board BetonWood

Density (kg/m³)1350
Fire resistance according to EN 13501-1A2-fl-s1
Thermal conductivity coefficient λD W/(m∗K)0,26
Specific heat [J/(kg∗K)]1880
Resistance to vapor diffusion μ22,6
Coefficient of linear thermal expansion α0,00001
Thick swelling after 24 hours in water1,5%
Surface PH value11
Resistance to compression (kPa)9000,00
Transverse tensile strength (kPa)500,00
Cutting resistance (kPa)500,00
Elasticity module E (kPa)4.500,00

  wood fiber panels FiberTherm

Density (kg/m³) 100÷160
Fire resistance according to EN 13501-1E
Thermal conductivity coefficient λD W/(m∗K)0,037÷0,039
Specific heat [J/(kg∗K)]2100
Resistance to vapor diffusion μ 5
Flexural strength at 10% of compression σ (N /mm²) 0,05
Tensile strenght (kPa)≥ 2,5
Resistance to compression (kPa) 50,00
Flexural resistance (kPa·s)/m²≥ 100
Waste code 030105/170201

BetonRadiant Fiber panels are also:

• resistant to the outside;
• does not freeze;
• free from formaldehyde, asbestos.

The system is also available in the version coupled directly in the factory with an insulating layer, which improves the radiant capacity of the entire package.